Download PDF
Your contact: +1 (317) 899-1395 • info@reo-usa.com

REOMED Isonet Network isolator

Transformers

REOMED Isonet Network isolator

Unique Selling Point


  • Protection in both transfer directions
  • Interruption of the shield connection of the network cable
  • No additional power supply required
  • No software installation required
  • Maintenance-free
  • RoHS compliant
  • EN 60950-1
  • EN 60601-1

Description


The REOMED Isonet network isolator is used for electrical isolation of devices in copper wire-bound Ethernet networks.
The isolation protects equipment and people from the effects of possible electrical voltage spikes on power supplies.
Potential equalization currents on the shielding of the network cable are reliably prevented.

 

 

Technical Data


  • Isolation voltage : 4 kV
  • Insertion loss : -1.3 dB max.
  • Return loss : - 8 dB min.

Technical data

 

Isolation voltage

4 KV

Input / output connector

RJ45

Supported network protocols

10BaseT, 100BaseTx, 1000BaseT

Insertion loss -1.3 dB max.
Return loss -8 dB min.
Protection IP 20
Max. voltage of the connected devices 250 Vac rms
Operating temperature -10 to +70°C
Storage temperature -40 to +85°C
Humidity 10 to 90% (non-condensing)
Housing plastic
Weight

 45 g

Dimensions (B x H x T)

 25mm x 66mm x 40mm

Your contact: +1 (317) 899-1395 • info@reo-usa.com

REOMED Isonet Network isolator

Transformers