us

Voltage Stabiliser

REO voltage stabilisers - the optimum ballasts

Voltage stabilisers are used as ballasts in single-phase and three-phase networks with fluctuating voltages to regulate these mains voltage fluctuations.

Therefore, the consumer who is connected receives a constant voltage which results in a constant level of machine performance that is then independent from the fluctuating mains network.

  • REOSTAB NK

    Single-phase voltage stabilizers

    REOSTAB NK
    • Adjusting time: ca.2 sek
    • Input voltage: 220 V
    • Output voltage: 220 ± 0.5% V

    REO manufactures and develops REOSTAB single-phase voltage stabilizers as ballasts for networks with fluctuating voltages, like that, a constant voltage at the output is guaranteed. The unit consists of a variable transformers booster transformer and a controller for the variable transformer.

    Controller

    • NLR 2012 Digital± 1% Accuracy
    • NLR 7000 Digital± 0.5 Accuracy
    • TVR 6500 Analog± 1% Accuracy for 24 V drive motors

    The regulators are installed within the system and wired. The maximum speed is usually:
    NLR 2012 = 3 sec .
    NLR 7000 = 2 sec
    TVR 6500 = 2 sec . per bar ( max. difference )

     

    Applications

    • Plants and data processing systems
    • Regenerative plants
    • Machine controls

     

  • REOSTAB DNK

    Three-phase voltage stabilizers

    REOSTAB DNK
    • Adjusting time: ca.2 bzw. ab Größe SD 9 4 sek
    • Input voltage: 3x380 bzw 3x220 V
    • Output voltage: 3x380 bzw 3x220 ± 0.5% V

    REO three-phase voltage stabilizers are designed for three-phase systems with neutral conductor. We can also offer controllers without neutral conductor (on request).

    REOSTAB THREE-phase voltage stabilizers as ballasts for networks with fluctuating voltages, like that, a constant voltage at the output is guaranteed. The unit consists of a variable transformers booster transformer and a controller for the variable transformer.

    Controller 

    • NLR 2012 Digital± 1% Accuracy
    • NLR 7000 Digital± 0.5 Accuracy
    • TVR 6500 Analog± 1% Accuracy for 24 V drive motors

    The regulators are installed within the system and wired. The maximum speed is usually:

    NLR 2012 = 3 sec .
    NLR 7000 = 2 sec
    TVR 6500 = 2 sec . per bar (max. difference)

    Applications

    • Plants and data processing systems
    • Regenerative plants
    • Machine controls

     

Downloads